Introduction
The oil level can be checked on the dipstick. Check it every time before you use your generating set.

Steps to take

  1. Make sure the generator is on a flat and level surface or the dipstick will provide an inaccurate reading.
  2. Make sure the engine has rested a bit. The oil has to be relatively cool.
  3. Remove the dipstick.
  4. Clean the dipstick.
  5. Replace the dipstick without tightening it
  6. Remove the dipstick again and keep it in a vertical position.
  7. Check if the oil on the dipstick is between the two level marks.
  8. If the oil level is below the lowest level mark, add oil (make sure to use the right oil!)
  9. Replace the dipstick and tighten it well.


        

Contact

WorldPowerFaqs

Tegelrijstraat 175
3850 Nieuwerkerken
Belgium

+3211586161

This email address is being protected from spambots. You need JavaScript enabled to view it.

Language